Georgian Oak and Elm Yorkshire Ladder Back Chairs

• Turning - Any part of a piece of furniture that has been turned and shaped with chisels on a lathe. Turned sections include legs, columns, feet, finials, pedestals, stretchers, spindles etc. There have been many varieties and fashions over the centuries: baluster, melon, barley-sugar, bobbin, cotton-reel, rope-twist, and so on. Split turning implies a turned section that has been cut in half lengthwise and applied to a cabinet front as a false decorative support.
• Rush Seating - Associated with country style chairs, stools and settees, rush seats are woven from rushes, with the pattern of the weaving often dividing the the chair seat diagonally into four triangles.
  
  The weaving of rushes has been practiced for centuries, and it is believed that some early rush seats of the 18th and 19th century were painted, although common practice now is to leave the rush in its natural state. As the rush ages the colour
  
  Rushes of the type used in Europe for seating are not available in Australia, and instead fibre rush, a man-made product from one-ply twisted paper, is used. Another substitute material is twisted natural sea grass.
  
  Seats in Danish furniture of the 1950s were often finished with Danish cord, a three ply twisted paper cord, which has a similar appearance to rush.
• Oak - Native to Europe and England, oak has been used for joinery, furniture and building since the beginning of the medieval civilisation. It is a pale yellow in colour when freshly cut and darkens with age to a mid brown colour.
  
  Oak as a furniture timber was superceded by walnut in the 17th century, and in the 18th century by mahogany,
  
  Semi-fossilised bog oak is black in colour, and is found in peat bogs where the trees have fallen and been preserved from decay by the bog. It is used for jewellery and small carved trinkets.
  
  Pollard oak is taken from an oak that has been regularly pollarded, that is the upper branches have been removed at the top of the trunk, result that new branches would appear, and over time the top would become ball-like. . When harvested and sawn, the timber displays a continuous surface of knotty circles. The timber was scarce and expensive and was used in more expensive pieces of furniture in the Regency and Victorian periods.
• Georgian - As an English stylistic period, Georgian is usually taken to cover the period from George I (1714) to the Regency of Prince George (1811-20), although the period from 1800 to 1830 is sometimes designated as the Regency period. During the Georgian period the great English cabinetmakers and designers such as Chippendale, Hepplewhite, Adam Sheraton etc., were all active.
  
  Therefore there isn't a single 'Georgian style' as such and to say something is 'Georgian', usually means it was made between 1714 and 1830. This assumes we discount George V and George VI, both being from the 20th century.
  
  The styles popular at the time of each reign were:
  
  George I (1714-1727) saw out the last years of the Baroque period.
  
  George II (1727-1760) reigned during the Rococo period.
  
  George III (1760-1820) saw the last gasp of the Rococo, all of the early Neo-Classic 'Adam style' and most of the later neo-Classic 'Regency style'.
  
  George IV (Prince Regent 1820-1830)encompassed the last of the 'Regency' style.
  
  William IV's reign (1830-1837) was something of a no man's land (stylistically) and he wasn't a 'George' anyway. He covered the last glimmerings of 'Regency' and the start of the 'Victorian' style.
• Splat - The central back support between the top rail and the seat in chairs and couches. They may take a variety of forms, and run either horizontally or vertically.
• Turned Legs - are legs which have been turned on a lathe. In use from the 16th century, turned legs on tables, chairs and cabinets became more frequent until, by the 1830s, the Georgian square or tapered leg was rarely found except in country pieces.
• Pad Foot - In furniture design, a pad foot refers to a type of
  
  furniture foot that is shaped like a flattened ball or pad. It is a common
  
  design element in traditional furniture styles, particularly in English and
  
  American furniture from the 18th and 19th centuries. The pad foot is typically
  
  wider than it is tall, with a broad, flat surface that rests directly on the
  
  floor. It is often carved or turned with decorative details, such as fluting or
  
  ridges, and can be made from a variety of materials, such as wood, metal, or
  
  leather.
  
  
  Pad feet are used to support the legs of various types of
  
  furniture, such as chairs, tables, and cabinets. They are often used in
  
  combination with other types of feet, such as bun feet or bracket feet, to
  
  create a more complex and decorative furniture design. In terms of
  
  functionality, pad feet provide stability and support to furniture pieces, and
  
  can help distribute the weight of the piece evenly across the floor. In terms
  
  of design, they add a classic and traditional look to furniture designs, and
  
  are often used to create a sense of elegance and refinement.

This item has been included into following indexes:

• chairs, sets of 6, style or period
  • Georgian 89
  • ladder backs 35
• chairs, sets of 6, timber
  • all styles and timbers 737
  • elm 28
  • oak 92
• chairs, sets of 8 - all styles and timbers 313