A French walnut 19th century armoire, the arched moulded…
click the photo to enlarge
A French walnut 19th century armoire, the arched moulded cornice, above a mirrored door, flanked by canted corners, on block feet. 238 cm high, 108 cm wide, 41 cm deep.

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Block Feet - Block feet are usually found on square or sometimes tapered legs. Although the basic block foot is square on all sides, there are variations including a tapered block foot, moulded block foot and carved block foot.
  • Cornice - The upper section of a high piece of furniture such as a bookcase, wardrobe or cabinet that sits immediately on the main structure. The cornice is usually decorated with a variety of architectural mouldings, worked either with a moulding plane or, from the later 19th century, by machine. The front and side of the cornice are mitred together, strengthened by glue blocks, and the back is generally a simple dovetailed rail to hold the structure together. Cornices are generally, though not always, fitted separately to the piece and are held in place either by screws sunk into the top board or by wooden corner blocks. A pediment may sit above the cornice, but sometimes the terms cornice and pediment are used interchangeably.
  • Canted Corners - In decorative arts, especially furniture making, a canted corner refers to a technique where the corner of the piece is angled or "canted" to create a diagonal corner. This is different from a chamfered corner which is a technique where the edges of a corner are cut at an angle, creating a diagonal edge or "bevel" along the corner.

    A canted corner is typically used to add visual interest to the item. It can be found in various styles of furniture such as contemporary, Art Deco, or traditional. It is often used to create a sense of movement and dynamism in a piece.

    Canting a corner is a more complex technique than chamfering, and it is typically done by tilting the corner of a piece of furniture and then cutting the wood to match the angle. It's a technique that requires precise measurements and a good understanding of angles and geometry, and it is usually done by experienced artisans.

This item has been included into following indexes:

Visually similar items

A French walnut Louis XVI style display cabinet, circa 1880, having a shaped pediment surmounted by an arched and swag carved crest above a single glazed and bevelled door flanked by fluted pillars, the sides with quarter veneer panelling above a plain apr

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A French flame mahogany display case circa 1880, in the Louis Philippe style, with a simply moulded pediment, rich feathered flame mahogany, the rectangular glazed door opening to four adjustable banded shelves, two lower full length drawers upon a moulded

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A Louis XV style French kingwood armoire, the lobed stepped rectangular cornice surmounted by an ormolu ribbon decoration, above a pair of mirrored doors enclosing three shelves with a pair of drawers below, and flanked by gilt pilasters on tapering short

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A French rosewood display cabinet in the Louis XVI manner, circa 1900, with a moulded cornice surmounted by a shaped and garland carved pediment above a bevel glazed full length door flanked by fluted pilasters and raised upon small fluted toupie style fee

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.