Louis XVI style kingwood veneer vitrine shaped glass door and…
click the photo to enlarge
Louis XVI style kingwood veneer vitrine shaped glass door and sides, gilt metal mounts, rouge marble top, lined interior, retains BADA label. Height 141 cm width 68 cm depth 32 cm

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Veneers - Veneers are thin sheets of well-figured timber that are glued under pressure to the surface of a cheaper timber for decorative effect, and then used in the making of carcase furniture.

    Early veneers were saw-cut so were relatively thick, (up to 2 mm) but is was realised that saw cutting was wasteful, as timber to the equivilent of the thickness of the saw was lot on each cut.

    A more efficient method was devised to slice the timber, either horizontally with a knife, or in a rotary lathe.

    Flame veneer, commonly found in mahogany or cedar furniture, is cut from the junction of the branches and main trunk. So-called fiddleback veneers, where the grain is crossed by a series of pronounced darker lines, is usually cut from the outer sections of the tree trunk.

    During the 17th and 18th centuries, and in much of the walnut marquetry furniture made during the latter part of the 19th century, the veneer was laid in quarters, each of the same grain, so that one half of the surface was the mirror image of the other.

    The use of veneer allows many other decorative effects to be employed, including stringing, feather banding, cross banding, and inlaid decorative panels in the piece. The carcase over which veneer is laid is usually of cheaper timber such as pine, oak or, sometimes in Australia during the first half of the 19th century, red cedar.

    The important thing to remember about veneers is that prior to about 1850 they were cut by hand, and were consequently quite thick - ranging up to about 2mm deep.

    From the mid-19th century veneers were cut by machines and were almost wafer-thin. This is a critical point when trying to judge the approximate age of veneered furniture.
  • Mounts - Mounts are used to describe bronze, brass and ormolu adornments on furniture especially quality furniture in the rococo and classical revival style, and are also the cabinet makers' name for the metal fittings on furniture, such as hinges, locks and handles, and metal edges and guards which protect furniture from damage.

This item has been included into following indexes:

Visually similar items

A French gilt-wood display cabinet, 169 cm high, 73 cm wide, 40 cm deep

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

An antique Louis XV style mahogany vitrine, later 19th century, the marble top demi-lune vitrine with shaped sides, having a pierced brass gallery above a single door and glazed sides opening to a velvet lined interior with three display shelves raised on

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A French Empire style mahogany vitrine, 19th century, with a gilt gallery above a shaped pediment, a single partially glazed door above an inlaid panel festooned with ribbons instruments and flora and enclosing internal shelving, the sides also glazed and

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A French transitional-style mahogany vitrine, of d-shaped outline, the moulded top above a glazed door and sides enclosing a white damask-lined interior with two shelves, on cabriole legs, with decorative cast brass mounts throughout. Height 141 cm. Width

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.