French style occasional table with veneers, inlays and brass…
click the photo to enlarge
French style occasional table with veneers, inlays and brass gallery and drawer

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Veneers - Veneers are thin sheets of well-figured timber that are glued under pressure to the surface of a cheaper timber for decorative effect, and then used in the making of carcase furniture.

    Early veneers were saw-cut so were relatively thick, (up to 2 mm) but is was realised that saw cutting was wasteful, as timber to the equivilent of the thickness of the saw was lot on each cut.

    A more efficient method was devised to slice the timber, either horizontally with a knife, or in a rotary lathe.

    Flame veneer, commonly found in mahogany or cedar furniture, is cut from the junction of the branches and main trunk. So-called fiddleback veneers, where the grain is crossed by a series of pronounced darker lines, is usually cut from the outer sections of the tree trunk.

    During the 17th and 18th centuries, and in much of the walnut marquetry furniture made during the latter part of the 19th century, the veneer was laid in quarters, each of the same grain, so that one half of the surface was the mirror image of the other.

    The use of veneer allows many other decorative effects to be employed, including stringing, feather banding, cross banding, and inlaid decorative panels in the piece. The carcase over which veneer is laid is usually of cheaper timber such as pine, oak or, sometimes in Australia during the first half of the 19th century, red cedar.

    The important thing to remember about veneers is that prior to about 1850 they were cut by hand, and were consequently quite thick - ranging up to about 2mm deep.

    From the mid-19th century veneers were cut by machines and were almost wafer-thin. This is a critical point when trying to judge the approximate age of veneered furniture.
  • Gallery - On furniture, a gallery is a small upright section, frequently pierced and decorated, around the tops of small items of furniture, such as davenports, side tables, and so forth. Galleries are made in brass or bronze,and be fretted, pierced or solid timber. A three-quarter gallery is one that surrounds three of the four sides of a table, desk or other top.

This item has been included into following indexes:

Visually similar items

Inlaid oval marble top French parlour table with gallery & single drawer

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

Fine antique French Bouillotte table, with marble top, pierced brass gallery, square tapering legs, 79 cm high, 65 cm diameter

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A pair French cherrywood single drawer bedside tables with floral decoration. 76 cm high, 43 cm long, 31 cm depth

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A fine French Louis XV style walnut and floral marquetry three drawer oval bedside cabinet. 72 cm high, 43 cm wide, 31 cm deep.

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.