A burr walnut veneer bedside table, one shelf & cupboard, 72 x…
click the photo to enlarge
A burr walnut veneer bedside table, one shelf & cupboard, 72 x 40 x 40 cm

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Veneers - Veneers are thin sheets of well-figured timber that are glued under pressure to the surface of a cheaper timber for decorative effect, and then used in the making of carcase furniture.

    Early veneers were saw-cut so were relatively thick, (up to 2 mm) but is was realised that saw cutting was wasteful, as timber to the equivilent of the thickness of the saw was lot on each cut.

    A more efficient method was devised to slice the timber, either horizontally with a knife, or in a rotary lathe.

    Flame veneer, commonly found in mahogany or cedar furniture, is cut from the junction of the branches and main trunk. So-called fiddleback veneers, where the grain is crossed by a series of pronounced darker lines, is usually cut from the outer sections of the tree trunk.

    During the 17th and 18th centuries, and in much of the walnut marquetry furniture made during the latter part of the 19th century, the veneer was laid in quarters, each of the same grain, so that one half of the surface was the mirror image of the other.

    The use of veneer allows many other decorative effects to be employed, including stringing, feather banding, cross banding, and inlaid decorative panels in the piece. The carcase over which veneer is laid is usually of cheaper timber such as pine, oak or, sometimes in Australia during the first half of the 19th century, red cedar.

    The important thing to remember about veneers is that prior to about 1850 they were cut by hand, and were consequently quite thick - ranging up to about 2mm deep.

    From the mid-19th century veneers were cut by machines and were almost wafer-thin. This is a critical point when trying to judge the approximate age of veneered furniture.
  • Burr - Burr (or in the USA, burl) is the timber from the knotted roots or deformed branch of the tree, which when cut, displays the small circular knots in various gradations of colour. It is always cut into a decorative veneer, most commonly seen as burr walnut on 19th century furniture.

This item has been included into following indexes:

Visually similar items

Victorian fruitwood desk compendium having two hinged doors, a moving calendar & various document compartmets, with keys. Condition: good, some minor age related wear. Dimensions 41 x 36.5 x 32 cm

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

Frith's Cosmoscope, c1870, domed burr walnut veneered case, with mother of pearl decoration, hinged lid fall front opening, to hinged mahogany panel, with viewing lens and easel, together with 56 photo pictures, from the Lands of the Bible, illustrated by

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

Australian Colonial cedar hanging shelves, mid-19th century, with three adjustable shelves and carved side supports, height 112 cm width 113 depth 21 cm. Provenance: Warwick Oakman Antiques, Hobart. Collection of George and Adisa Pompei, Sydney

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A pair of Hans Wegner wall mounted Units. C, 1960s, Denmark. Rosewood. 18 cm high, 40 cm wide, 24 cm deep

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.