Early 19th Century Cedar Chest of Drawers
You must be a subscriber, and be logged in to view price and dealer details.
Subscribe Now to view actual auction price for this item
When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.
- Turning - Any part of a piece of furniture that has been turned and shaped with chisels on a lathe. Turned sections include legs, columns, feet, finials, pedestals, stretchers, spindles etc. There have been many varieties and fashions over the centuries: baluster, melon, barley-sugar, bobbin, cotton-reel, rope-twist, and so on. Split turning implies a turned section that has been cut in half lengthwise and applied to a cabinet front as a false decorative support.
- Apron - A decorative wooden panel that sits underneath the top surface of a table or chair, and unites the top of the piece with the legs, running at right angles to the underside. On carcase furniture such as a chest or wardrobe, the apron sits below the drawers or doors and attaches to the legs.
On carcase furniture without legs the panel under the drawers or doors sits on the floor and is termed a plinth.
An apron can provide a decorative touch to an otherwise unadorned piece of furniture and at the same time provide structural support and strength. They can be carved or pierced and quite elaborate. - Serpentine - Resembling a serpent, in the form of an elongated 'S'. A serpentine front is similar to a bow front, except that the curve is shallow at each end, swelling towards the middle. The term presumably derives from its similarity to a moving snake or serpent. Serpentine fronts are usually veneered, with the carcase either being cut and shaped from a solid piece of timber, or built in the 'brick' method.
- Bracket Feet - On bracket feet the corner edge is square and joined by a mitre to its partner on the opposite angle. The inner edge is usually shaped or scalloped. Bracket feet were first introduced in the early 18th century and used until c. 1830 and are found on carcase furniture such as chests, cabinets, bookcases and bureaux.
Ogee bracket feet, a variation on straight bracket feet, have the outside edge forming an "S" shaped curve with the top bulging outward and the bottom turning inward.
On splayed bracket feet, the exterior edge curves outward.
This item has been included into following indexes:
Visually similar items
A late Georgian mahogany chest of drawers, circa 1830s, with a good deep patina, having two half width drawers and three full width drawers below of graduating depth, all cockbeaded and oak lined, and having brass ring handles and Prince of Wales feather s
A Victorian Anglo-Colonial teak campaign chest, latter half 19th century, of typical form in two halves with two short above three long drawers, with brass flush handles to the drawers and protective brass corners throughout, brass carrying handles to the
An antique blackwood chest of drawers, 19th century, in rich tonings and having two half width and three full width drawers of graduating depth all with ring pull black metal handles and circular plates, with cross banding and stringing throughout and rais
A Victorian mahogany chest of drawers, circa 1860s, the top with squared edges and rounded corners above a pair of drawers and three full length drawers of graduating depth all with cockbeading, having turned handles, a ribbed skirt and upon ringed toupie