An early 20th century heavily carved Burmese credenza featuring…
click the photo to enlarge
An early 20th century heavily carved Burmese credenza featuring a large mirrored back, four drawers and two doors to base, elevated on cabriole legs, four barley twist columns, 190 x 185 x 50 cm

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Cabriole Leg - The cabriole leg evolved from an elongated scroll, curving out at the knee which may or may not be carved, and forming a serpentine shape as it descends to the foot.

    First introduced into English furniture in the late 17th century, cabriole legs were widely used during the Queen Anne and early Georgian periods, where they frequently terminated in a pad foot or ball and claw foot. The style has had many imitators since then. The cabriole leg was re-introduced in the mid-19th century, and is commonly associated with the balloon-back dining or drawing-room chairs made in walnut, mahogany or, in Australia, cedar. The Victorian cabriole leg, on the whole, was rather more slender than the earlier form, following the French style, which emphasized the delicacy and daintiness of the chairs they were designed to support. Cabriole legs are sometimes found on windsor chairs, especially those made during the 18th century.
  • Barley Twist - The leg, and frequently other uprights such as columns, chair frames, spindles and stretchers, are turned in fairly wide and deep spirals, usually slightly rounded. Also known as the 'Jacobean twist' and common on the dark stained Jacobean Revival furniture of the 1930s and 40s.

    As a rule, the twists on opposite uprights should move in a contrary direction. Thus, if the spiral on a right side is clockwise, that on the left side should move in a counter-clockwise direction.

    This is also true of rope-twist or cable-twist turning, a nautical term that came into fashion after Nelson's victories over the French fleet. The essential difference is that with rope twists, the spirals are more finely turned on the lathe and placed closer together, than they are with barley-sugar turnings.
  • Column - An architectural feature sometimes used for decorative effect and sometimes as part of the supporting construction. Columns should generally taper slightly towards the top. They may be plain or decorated with carving, fluting or reeding. Columns may be fully rounded or, more commonly, half-rounded and attached with glue, screws or pins to the outer stiles of doors, or the facing uprights on cabinets and bureaux.

This item has been included into following indexes:

Visually similar items

Victorian mahogany chiffonier with single shelf to back

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

Anglo-Indian padouk consol table: Ornately pierced and carved scrolling foliate design with peacock upright and claw feet, carved Thomas Hope scroll back. Circa 1840. Height 100 cm, width 128 cm, depth 59 cm.

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

French mirrored dressing chest, approx 223 cm high, 124 cm wide, 53 cm deep

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A Victorian walnut canterbury, three divided sections with turned supports and scrolled pierced fretwork walls to the top, the drawer with inlaid decoration, raised on turned legs with ceramic casters. 57 cm x 40 cm x 53 cm

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.