A Victorian oval walnut veneered tea table. 71 cm high, 106 cm…
click the photo to enlarge
A Victorian oval walnut veneered tea table. 71 cm high, 106 cm wide, 60 cm deep

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Veneers - Veneers are thin sheets of well-figured timber that are glued under pressure to the surface of a cheaper timber for decorative effect, and then used in the making of carcase furniture.

    Early veneers were saw-cut so were relatively thick, (up to 2 mm) but is was realised that saw cutting was wasteful, as timber to the equivilent of the thickness of the saw was lot on each cut.

    A more efficient method was devised to slice the timber, either horizontally with a knife, or in a rotary lathe.

    Flame veneer, commonly found in mahogany or cedar furniture, is cut from the junction of the branches and main trunk. So-called fiddleback veneers, where the grain is crossed by a series of pronounced darker lines, is usually cut from the outer sections of the tree trunk.

    During the 17th and 18th centuries, and in much of the walnut marquetry furniture made during the latter part of the 19th century, the veneer was laid in quarters, each of the same grain, so that one half of the surface was the mirror image of the other.

    The use of veneer allows many other decorative effects to be employed, including stringing, feather banding, cross banding, and inlaid decorative panels in the piece. The carcase over which veneer is laid is usually of cheaper timber such as pine, oak or, sometimes in Australia during the first half of the 19th century, red cedar.

    The important thing to remember about veneers is that prior to about 1850 they were cut by hand, and were consequently quite thick - ranging up to about 2mm deep.

    From the mid-19th century veneers were cut by machines and were almost wafer-thin. This is a critical point when trying to judge the approximate age of veneered furniture.
  • Victorian Period - The Victorian period of furniture and decorative arts design covers the reign of Queen Victoria from 1837 to 1901. There was not one dominant style of furniture in the Victorian period. Designers used and modified many historical styles such as Gothic, Tudor, Elizabethan, English Rococo, Neoclassical and others, although use of some styles, such as English Rococo and Gothic tended to dominate the furniture manufacture of the period.

    The Victorian period was preceded by the Regency and William IV periods, and followed by the Edwardian period, named for Edward VII (1841 ? 1910) who was King of the United Kingdom and the British Dominions and Emperor of India for the brief period from 1901 until his death in 1910.

This item has been included into following indexes:

Visually similar items

A George III mahogany tripod base wine table, English, circa 1790. 67 cm high, 73.8 cm diameter

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

Fine quality Victorian burr walnut oval wine table on fluted tapering column and leaf carved scroll legs

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A Victorian oval walnut inlaid occasional table, later 19th century, the low form table with stringing and four arabesque vegetal motifs to the top raised on a birdcage base with splayed legs and casters. Height 56 cm. Length 98 cm. Width 56 cm

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A late Victorian marquetry inlaid walnut apprentice Sutherland table, 53 cm high, 62 cm wide, 53 cm deep

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.