A walnut veneered console table labelled Maitland Smith, 85 cm…
click the photo to enlarge
A walnut veneered console table labelled Maitland Smith, 85 cm high, 70 cm wide, 33 cm deep

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Veneers - Veneers are thin sheets of well-figured timber that are glued under pressure to the surface of a cheaper timber for decorative effect, and then used in the making of carcase furniture.

    Early veneers were saw-cut so were relatively thick, (up to 2 mm) but is was realised that saw cutting was wasteful, as timber to the equivilent of the thickness of the saw was lot on each cut.

    A more efficient method was devised to slice the timber, either horizontally with a knife, or in a rotary lathe.

    Flame veneer, commonly found in mahogany or cedar furniture, is cut from the junction of the branches and main trunk. So-called fiddleback veneers, where the grain is crossed by a series of pronounced darker lines, is usually cut from the outer sections of the tree trunk.

    During the 17th and 18th centuries, and in much of the walnut marquetry furniture made during the latter part of the 19th century, the veneer was laid in quarters, each of the same grain, so that one half of the surface was the mirror image of the other.

    The use of veneer allows many other decorative effects to be employed, including stringing, feather banding, cross banding, and inlaid decorative panels in the piece. The carcase over which veneer is laid is usually of cheaper timber such as pine, oak or, sometimes in Australia during the first half of the 19th century, red cedar.

    The important thing to remember about veneers is that prior to about 1850 they were cut by hand, and were consequently quite thick - ranging up to about 2mm deep.

    From the mid-19th century veneers were cut by machines and were almost wafer-thin. This is a critical point when trying to judge the approximate age of veneered furniture.

This item has been included into following indexes:

Visually similar items

A Swedish Empire gilt bronze mounted flame mahogany pier mirror and console the two sectional mirror plate within a columnar surround, beneath a shaped pediment and gilt bronze lyre and acanthus leaf trophy, the rectangular lower section above a demi-lune

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

An Italian late 17th century walnut prie-dieu, circa 1680, the hinged top with gadrooned edge above frieze with rosettes, supported by columns on platform base with hinged lid on moulded plinth, 75 cm wide, 55 cm deep, 86 cm high

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

An Australian cedar dressing mirror on matched stand, 19th century a rectangular framed mirror glass supported between two turned supports, above platform base with moulded edge and standing on squat bun feet 60 cm high, 60 cm wide, 29.5 cm deep

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A George III mahogany toilet mirror, circa 1810. The rectangular plate with moulded frame and supports with brass finials and adjusters above a bow front base with feather banding, ebony and satinwood stringing and three drawers, on ogee bracket feet, 54 c

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.