A French walnut bed, circa 1920, with a bold carved rose…
click the photo to enlarge
A French walnut bed, circa 1920, with a bold carved rose pediment above a shaped walnut panel and fluted pilasters, the breakfront end board conforming and with carved side panels, upon plinth style bracket feet; with bedrails. Height 135 cm. Width 162 cm

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Plinth - The square or rectangular base of a piece of cabinet furniture, often ornamented with moulding. The plinth may be separate, as in some wardrobes or presses, and act as the support for the carcase. In a false plinth, the moulded boards may be attached directly to the piece. Furniture with a plinth base usually does not have separate feet. The term derives from architecture where it denotes the base of a column or statue.
  • Fluting - A form of decoration found on many pieces of furniture, as well as ceramics, silver and clocks, in which round-bottomed grooves, of varying width and depth, are let into columns, pilasters, legs. As a general rule, flutes are cut in the vertical, though they may follow a turned leg in a spiral pattern. In cross-section, they may be described as a series of 'U' shapes, rising and narrowing at each end of the groove. Fluting is the opposite of reeding, with which fluting is often associated.
  • Pilasters - In furniture a pilaster is a flattened column-like detail

    applied to furniture. It is similar to a pilaster in architecture, but it is

    typically smaller and less ornate. Pilasters are often used to decorate the

    fronts of bookcases, cabinets, and other pieces of furniture. Pilasters can be

    made of wood, metal, or other materials. They can be fluted, carved, or plain.

    Pilasters are often used to add a touch of elegance and sophistication to

    furniture.

  • Bracket Feet - On bracket feet the corner edge is square and joined by a mitre to its partner on the opposite angle. The inner edge is usually shaped or scalloped. Bracket feet were first introduced in the early 18th century and used until c. 1830 and are found on carcase furniture such as chests, cabinets, bookcases and bureaux.

    Ogee bracket feet, a variation on straight bracket feet, have the outside edge forming an "S" shaped curve with the top bulging outward and the bottom turning inward.

    On splayed bracket feet, the exterior edge curves outward.
  • Pediment - The uppermost section of a tall usually double-heightened piece of cabinet furniture, surmounting the cornice. The pediment can take a variety of forms derived from the architecture of classical antiquity. A broken pediment is of triangular shape, however, the two raised sides do not meet at the apex but are 'broken' the gap between them often ornamented with an urn or finial. Swan-neck pediments are of similar form, although the uprights are gracefully arched, resembling a swan's neck. They are often found, for example, on longcase clocks.
  • Panels - Timber pieces, usually of well-figured wood either recessed or applied over the frames of doors and as decoration elsewhere in the carcase of cabinet furniture. The panels may take a variety of shapes rectangular, square, shield shape, oval, half-round or in the form of Egyptian pylons.
  • Circa - A Latin term meaning 'about', often used in the antique trade to give an approximate date for the piece, usually considered to be five years on either side of the circa year. Thus, circa 1900 means the piece was made about 1900, probably between 1895 and 1905. The expression is sometimes abbreviated to c.1900.
  • Breakfront - A design generally found in larger pieces of furniture, such as bookcases, wardrobes and some sideboards. The line of the front is interrupted by the middle section standing out from each end. In a reverse breakfront, the centre section is recessed behind each end. Breakfronted pieces are usually made in three sections the middle and the two wings which are held together by the cornice and pediment, and the plinth on which it stands. The sensible buyer should show caution before buying breakfront pieces, especially bookcases, which are highly desirable and expensive. Always check that the timber, colour, patination, backboards, decoration and thickness of the wood are same in each section.

This item has been included into following indexes:

Visually similar items

Hall seat: English oak with handsomely carved panels & recumbent lion arm rests, late 19th or early 20th century. W 122 cm deep48 cm, height 110 cm

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A carved oak sideboard, circa 1900, approximately 110 cm high, 137 cm wide, 47 cm deep

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

An Edwardian walnut gentleman's robe, circa 1900-1910, maker's mark of Andreas Svensson, Latrobe Street Melbourne, having an arched broken pediment upon a breakfront cornice with two cupboards, fitted to the interiors, with a central drawer below flanked b

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A mahogany bed in the Louis XVI style, circa 1940, having a moulded pediment with a gilt bronze foliate and shell crest, the headboard with quarter veneer panels, cross and feather banding, stringing and a sunburst panel centrally with an inlaid swag, with

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.