A 19th century Continental walnut wine table with reeded edge…
click the photo to enlarge
A 19th century Continental walnut wine table with reeded edge and radiating veneered top, on gun barrel pedestal support with inverted tripod base. Diameter 80 x 73 cm

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Veneers - Veneers are thin sheets of well-figured timber that are glued under pressure to the surface of a cheaper timber for decorative effect, and then used in the making of carcase furniture.

    Early veneers were saw-cut so were relatively thick, (up to 2 mm) but is was realised that saw cutting was wasteful, as timber to the equivilent of the thickness of the saw was lot on each cut.

    A more efficient method was devised to slice the timber, either horizontally with a knife, or in a rotary lathe.

    Flame veneer, commonly found in mahogany or cedar furniture, is cut from the junction of the branches and main trunk. So-called fiddleback veneers, where the grain is crossed by a series of pronounced darker lines, is usually cut from the outer sections of the tree trunk.

    During the 17th and 18th centuries, and in much of the walnut marquetry furniture made during the latter part of the 19th century, the veneer was laid in quarters, each of the same grain, so that one half of the surface was the mirror image of the other.

    The use of veneer allows many other decorative effects to be employed, including stringing, feather banding, cross banding, and inlaid decorative panels in the piece. The carcase over which veneer is laid is usually of cheaper timber such as pine, oak or, sometimes in Australia during the first half of the 19th century, red cedar.

    The important thing to remember about veneers is that prior to about 1850 they were cut by hand, and were consequently quite thick - ranging up to about 2mm deep.

    From the mid-19th century veneers were cut by machines and were almost wafer-thin. This is a critical point when trying to judge the approximate age of veneered furniture.
  • Reeding - A series of parallel, raised convex mouldings or bands, in section resembling a series of the letter 'm'. The opposite form of fluting, with which it is sometimes combined. Reeding is commonly found on chair legs, either turned or straight, on the arms and backs of chairs and couches and around table edges in the Neoclassical or Classical Revival manner. Reeding was also used as a form of decoration during the Edwardian period, but it is usually much shallower and evidently machine made.

This item has been included into following indexes:

Visually similar items

An Anglo Indian rosewood tilt top table, the plain circular top above a turned and reeded campagna column and triform base with reeded scroll feet, 102 diameter x 77 cm high. Condition: split and marks to top, stabalising strut added to underneath of top,

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A Tasmanian cedar wine table by Valance, circa 1960, 50 cm diameter

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A George III oak & elm occasional table c.1810. The table has a tilt-top action with turned pedestal column upon three cabriole legs. Height 73 cm. Diameter 63 cm

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

Wine table, Australian cedar, Victorian turned column diameter 55 cm

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.